D-Link DIR-412 User Manual

57D-Link DIR-412 User Manual
Section 3 - Conguration
Use this option to save the current router conguration
settings to a le on the hard disk of the computer you are
using. First, click the Save button. You will then see a le
dialog, where you can select a location and le name for
the settings.
Use this option to load previously saved router
conguration settings. First, use the Browse control to nd
a previously save le of conguration settings. Then, click
the Load button to transfer those settings to the router.
Click the Restore button to restore all configuration
settings back to the settings that were in eect at the time
the router was shipped from the factory. Any settings that
have not been saved will be lost, including any rules that
you have created. If you want to save the current router
conguration settings, use the Save button above.
Click to reboot the router.
Click the Clear button to restore the device back to the
English interface version and remove other languages
installed for the system web pages.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
System Settings

D-Link DIR-412 Specifications

Operating Environment

operating temperature	0˚ to 40˚C (32˚ to 104˚F)
operating humidity	10%-95% (Non-condensing)

Power

power supply	DC 5V/2.5A +/- 5%

Weight and Dimensions

dimensions	122 x 97 x 27 mm