Name: D-Link DIR-600
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

76D-Link DIR-600 User Manual

Section 3 - Conguration

Use this option to save the current router conguration

settings to a le on the hard disk of the computer you

are using. First, click the Save button. A le dialog will

appear, allowing you to select a location and le name

for the settings.

Use this option to load previously saved router conguration

settings. First, use the Browse option to nd a previously

saved le of conguration settings. Then, click the Upload

Settings button below to transfer those settings to the

router.

This option will restore all conguration settings back

to the settings that were in eect at the time the router

was shipped from the factory. Any settings that have

not been saved will be lost, including any rules that

you have created. If you want to save the current router

conguration settings, use the Save button above.

Click to reboot the router.

If you previously installed a language pack and want to

revert all the menus on the Router interface back to the

default language settings, click the Clear button.

Save Settings to

Local Hard Drive:

Load Settings from

Local Hard Drive:

Restore to Factory

Default Settings:

Reboot Device:

Clear Language

Pack:

System

This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory

default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.

Other manuals for D-Link DIR-600

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-600 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel	65/72.2 Mbps (max)
IEEE 802.11n 40MHz Channel	135/150 Mbps (max)
IEEE 802.11g	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

Frequency Range