DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Redirect
On the Advanced / Redirect page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
Figure 138. The Advanced / Redirect page.
To configure notifications, select the Enable checkbox. Then select needed checkboxes in the
Reasons for redirect section.
Parameter Description
Reasons for redirect
Physical connection
error
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
The device is not
configured
Notifications in case when the device works with default settings.
No connection
Notifications in case of problems of the connection used as the
default gateway (authorization error, the IPS's server does not
respond, etc.).
Firmware update Notifications in case of update of the device's firmware.
When you have configured the parameters, click the Apply button.
To disable notifications, deselect the Enable checkbox and click the Apply button.
Page 181 of 257
To Next Page
Loading...
Need help?
General
