DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Wireless Network Settings Wizard
To specify all needed settings for your wireless network, click the Wireless network settings
wizard link in the Home section.
Figure 51. The page for selecting the operating mode for the wireless network.
If you want to disable one or both bands of the wireless network, select the Turn off choice of the
Mode radio button and click the Next button. On the opened page, select the checkbox
corresponding to the band that should be disabled, and click the Next button. Then click the Apply
button. After clicking the button, the Home / Information page opens.
If you want to connect portable devices to the Internet via wireless connection, select the Access
point choice of the Mode radio button. Click the Next button.
If you want to configure the router as a client to connect to a wireless access point, select the Client
choice of the Mode radio button. Click the Next button.
Page 75 of 257
To Next Page
Loading...
Need help?
General
