DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
IPv6 PPPoE or PPPoE Dual Stack Connection
Figure 27. Configuring IPv6 PPPoE WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
If you need to specify the gateway address manually, deselect the SLAAC checkbox and fill in the
Static IPv6 gateway address field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page (for a detailed description of all the connection's parameters, see the
Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection section, page 99).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 66).
Page 51 of 257
To Next Page
Loading...
Need help?
General
