DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Con$guring IPTV
On the page, you can configure the router to use an IPTV set-top box.
Figure 50. Selecting a LAN port to connect an IPTV set-top box.
On the opened page, select the LAN port of the router to which you will connect your IPTV set-top
box.
If in the future you need to disconnect your IPTV set-top box from the specified LAN port and
connect to it a computer, start the IPTV settings wizard (for the detailed description of the
Wizard, see the IPTV Settings Wizard section, page 86).
If for accessing the Internet and IPTV services your ISP uses virtual local area networks with
identifiers (VLAN ID), to configure access to the IPTV service, proceed to the Advanced / VLAN
page, create a group of ports with the required value of the VLAN ID parameter, the Bridge type,
and the port to which the set-top box will be connected (see the VLAN section, page 172, for a
detailed description of the elements from the page).
Click the Next button to continue.
Click the Skip to next button in order not to apply the IPTV settings.
Click the Apply button to save the specified settings.
After clicking the Apply button, the Home / Information page opens.
Page 74 of 257
To Next Page
Loading...
Need help?
General
