DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
On the opened page, modify security settings of the guest network in the 2.4GHz band.
Select the Protected value from the Network Authentication drop-down list and enter a key (a
password that will be used to access your guest network) in the Network key field. Use digits and
Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed authentication
type is specified for the router's guest network in the 2.4GHz band.
When the Open value is selected, the Network key field is unavailable. After applying this
setting, the Open authentication type with no encryption is specified for the router's guest network
in the 2.4GHz band.
Figure 49. Selecting a security mode for the guest network in the 2.4GHz band.
Click the Next button to continue.
On the next pages, specify a new name and configure security settings for the guest network in the
5GHz band. Then click the Next button.
After that the page displaying all specified settings opens. Make sure that they are correct, and then
click the Apply button, or the Back button to specify other settings. After clicking the Apply
button, the page for configuring the router to use an IPTV set-top box opens (see the Configuring
IPTV section, page 74).
Page 73 of 257
To Next Page
Loading...
Need help?
General
