D-Link DMS-1250 Series User Manual

DMS-1250 Series Multi-G Ethernet Smart Managed Switch Hardware Installation Guide
23
5. Web-based Switch Configuration
Introduction
Logging into the Web UI
Web User Interface (Web UI)
Introduction
Most software functions of the Switch can be managed, configured, and monitored via the embedded HTML Web UI.
Management can be done on the Switch from remote stations anywhere on the network through a standard web
browser. The web browser acts as a universal access tool and can communicate directly with the Switch using the
HTTP or HTTPS (SSL) protocol.
The following web browsers are supported:
• Internet Explorer (version 8,9,10,11)
• Firefox
• Google Chrome
• Safari
• Microsoft Edge
NOTE: The default IP address of this switch is 10.90.90.90, with a subnet mask of 255.0.0.0.
NOTE: The default username is admin and the default password is admin.
Logging into the Web UI
To access the Web UI, open a standard web browser, enter the Switch’s IP address into the address bar of the
browser, and press the ENTER key.
5-1 IP address in Internet Explorer

D-Link DMS-1250 Series Specifications

General

Brand	D-Link
Model	DMS-1250 Series
Category	Switch
Language	English