DMS-1250 Series Multi-G Ethernet Smart Managed Switch Hardware Installation Guide
2
• Supports Auto Voice and Surveillance VLAN.
• Supports IPv4/IPv6 interfaces.
• Supports Static Routing.
• Supports Quality of Service (QoS) with Queue Handling and Class of Service (CoS).
• Supports Access Control List (ACL).
• Supports Secure Shell (SSHv2) with IPv4/IPv6 access.
• Support Transport Layer Security (TLS) versions 1.3.
• Supports Port Security of up to 64 MAC addresses per port.
• Supports Broadcast and Multicast Storm Control.
• Supports Traffic Segmentation.
• Supports D-Link SafeGuard Engine.
• Supports ARP Spoofing Prevention.
• Supports IP-MAC-Port Binding (IMPB).
• Supports DoS Attack Prevention.
• Supports Guest VLAN.
• Supports Link Layer Discovery Protocol (LLDP) with LLDP-MED.
• Supports Accessibility using multiple interfaces like the Command Line Interface (CLI), Web-based Graphical
User Interface (Web-based GUI), and more.
• Supports Telnet Server.
• Supports Trivial File Transfer Protocol (TFTP) Client.
• Supports Simple Network Management Protocol (SNMP) version 1, 2c, and 3.
• Supports DHCP Client.
• Support Dual Images and Configurations.
• Supports Simple Network Time Protocol (SNTP).
• Support Power Saving using the Link Status Mode.
• Support Time-based Power-over-Ethernet (PoE).
• Supports IEEE 802.3az compliance.
• Supports D-Link Discovery Protocol (DDP).
• Supports MIBs.
Note: The features are subject to change based on implementation plan without prior notice.
Front Panel Components
The front panel of the Switch features a variety of LED indicators, ports, a Reset button, and a Mode button (only of
PoE supported switches).
Figure 1-1 DMS-1250-10S
Figure 1-2 DMS-1250-10SP
To Next Page
Loading...
Need help?
General
