Internet/Print Server User’s Guide
Internet Server Setup26
You should immediately see the internet/print server web browser
interface menu. Note that the internet/print server IP can be book-
marked for future access so that it doesn’t need to be entered each
time.
The browser interface uses frames, so it is best if you use a frames-
capable browser program. Also, we advise you to temporarily sus-
pend the use of proxies – if you are using them – while accessing the
internet/print server as proxy settings may interfere with browser
access to local devices.
If you use a non-frames browser, when you receive the initial inter-
net/print server screen, you should see the main navigation menu
rather than the navigation menu and the system status screen. The
functions are the same, only the appearance will be different.
After you have access to the browser interface, use the menu options
in the left-hand frame to choose the settings you want to view, set or
modify. Some settings have limited options that must be selected
from a pull-down list.
Minimum Configuration
Regardless of how you intend to use the internet/print server, you
will need to consider and set some basic system settings. This sec-
tion is concerned with describing only those settings that are critical
to proper functioning of the internet/print server.
The following settings need to be configured for the internet/print
server to operate correctly (the first is a System setting, the others
are WAN port settings):
To Next Page
Loading...
Need help?
General
