Internet/Print Server User’s Guide
Configuration Settings54
Advanced Control Configuration
Manager Server IP Address
This setting is the IP address of the computer using the
IS Manager Server software included with the device. The
default IP address is 0.0.0.0.
Log and Filter
When set to Yes, the log and filter functions in IS Man-
ager server software will be enabled. The internet server will
create a log of all user connections and their status, viewable
in the IS Manager program. The user filters also become op-
erative, filtering connections by user, protocol and
destination, as defined in the IS Manager program. Default
setting is “No”.
Dial-up Schedule
The dial-up schedule settings are used to configure the
internet server to dial out only at certain times. Default set-
ting is “No”.
♦ Enable
Enables/disables the dial-out scheduling feature.
♦ Schedule Table
To Next Page
Loading...
Need help?
General
