D-Link DSL-2740B User Manual

DSL-2740B Wireless ADSL Router User Guide
15
All configuration and management of the Router is done using the web-based management interface pictured in the
above example. The configuration windows are accessed by clicking on the directory tabs: Home, Advanced, Tools,
and Status. Each tab has associated window buttons in the left hand panel of the web interface. Basic setup of the
Router can be completed in the windows accessed from the Home directory including: (Setup) Wizard, WLAN, WAN
(Internet), LAN (to configure the IP address of the Router), DNS and Dynamic DNS.
Wizard
To use the Setup Wizard, click the Setup Wizard button in the first browser window and follow the instructions.
Using the Setup Wizard – WAN Settings – PVC Settings
First configure VPI and VCI for your ADSL connection. Your ISP has given this information to you. Or select DSL
Auto-connect and allow router to detect the available VPI/VCI for you. You can also enable QoS (Quality of Service)
by checking Enable Quality Of Service.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole