D-Link DSL-2740B User Manual

43
4. Click Save Settings to apply your settings.
WLAN Security Window – WPA
WLAN Filter
The WLAN Filter is used to control wireless client devices access based on their MAC addresses. You can choose to
allow or deny the specific MAC addresses.
1. Click the Add button to enter WLAN Filter configuration window.
2. Enter the specific MAC address and click the Save Settings button to apply.
3. Click the MAC Restrict Mode radio button to select filter rule (Allow or Deny) and enable the WLAN filter.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole