D-Link DSL-2740B User Manual

63
All of the specified conditions in this classification rule must be satisfied for the rule to take effect.
To delete the configured QoS rule, check the box in Remove field and click Remove button on top.
ROUTING
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This
is used to specify that all packets destined for a particular network or subnet use a predetermined gateway.
1. Click the Add button to enter your routing configuration window.
2. Enter the Destination Network Address, Subnet Mask, Gateway IP Address, and/or available WAN
Interface.
3. Click Save Settings to apply this rule.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole