D-Link DSL-2740B User Manual

57
INCOMING IP FILTER Window
BRIDGE FILTER
Bridge filters are used to block or allow various types of packets through the WAN interface. This may be done for
security or to improve network efficiency. The rules are configured for individual devices based on MAC address. Filter
rules can be set up for source, destination or both. Bridge Filter is only effective on ATM PVCs configured in Bridge
mode. The Global Policy FORWARDED means that all MAC layer frames will be FORWARDED except those
matching with any of the specified rules in the following table. BLOCKED means that all MAC layer frames will be
BLOCKED except those matching with any of the specified rules in the following table.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole