D-Link DWA-182 User Manual

50D-Link DWA-182 User Manual
Appendix B - Networking Basics
Statically Assign an IP Address
*GZPVBSFOPUVTJOHB%)$1DBQBCMFHBUFXBZSPVUFSPSZPVOFFEUPBTTJHOBTUBUJD*1BEESFTTQMFBTFGPMMPXUIFTUFQTCFMPX
Windows® XP Users
t Windows® XP - Click on Start > Control Panel.BLFTVSFZPVBSFJO$MBTTJD7JFX%PVCMFDMJDLPOUIF/FUXPSL$POOFDUJPOTJDPO
t 3JHIUDMJDLPOUIFLocal Area Connection which represents your D-Link wireless network adapter (or other adapter) which will be connected
to your router.
t )JHIMJHIUInternet Protocol (TCP/IP) and click Properties.
t $MJDLUse the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router.
Example:*GUIFSPVUFST-"/*1BEESFTTJTNBLFZPVS*1BEESFTT9XIFSF
X is a number between 2 and 99. Make sure that the number you choose is not in use on the
network.
t 4FUDefault Gateway the same as the LAN IP address of your router or gateway.
t 4FUPrimary DNS the same as the LAN IP address of your router or gateway.
t 5IFSecondary DNS is optional (you may enter a DNS server from your ISP).
t $MJDLOK to save your settings.

D-Link DWA-182 Specifications

Power

current consumption (Tx)	495 mA
current consumption (Rx)	220 mA
operating voltage	5.0 VDC +/- 10%

Operating Environment

operating temperature	32°F to 104°F (0°C to 40°C)
operating humidity	10% to 90% maximum (non-condensing)

Weight and Dimensions

dimensions	3.8 x 1.1 x 0.5 inches (97.3 x 29.1 x 13.5 mm)
weight	21.94 grams