D-Link EAGLE PRO AI AX1500 User Manual

58D-Link G416 User Manual
Section 3 - Conguration
Network
Go to Settings > Network to change the local network settings of the router and congure the DHCP settings.
Click Save at any time to save the changes you have made on this page.
Network Settings
LAN IP Address Enter the IP address of the router. The default IP address is
192.168.0.1. If you change the IP address, you will need to
enter the new IP address in your browser to log in to the web
conguration.
Subnet Mask Enter the subnet mask of the router. The default subnet mask
is 255.255.255.0.
Management Link The default address to access the router’s conguration is
http://G416-xxxx.local/ (where xxx represents the last 4 digits
of your router's MAC address). You can replace G416-xxxx with
a name of your choice.
Local Domain Name Enter the domain name (optional).
Enable DNS Relay Disable this option to transfer the DNS server information from
your ISP to your computers. If enabled, your computers will
use the router's settings for DNS service.
G416-BD3A

D-Link EAGLE PRO AI AX1500 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Data Rate	1500 Mbps
LAN Ports	4 x Gigabit Ethernet
WAN Ports	1 x Gigabit Ethernet
Security	WPA3
MU-MIMO	Yes
Beamforming	Yes
Smart Connect	Yes
OFDMA	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
Frequency Bands	2.4 GHz, 5 GHz
Voice Control	Google Assistant, Amazon Alexa
Antenna Type	External