Daewoo DT-42A1 User Manual

AV2
AV1
L
-O
IDU
A
-R
O
EDIV-S
O
E
D
IV
AV3
• N.B.: When using the AV3 input, there is no need to use both as S-Video
will always take precedence on this input but you must have the right
and left audio leads connected to produce sound when using S-Video.
28
Watching Cable Broadcasts
Watching Cable Broadcasts
• To watch cable broadcasts,
subscribe to your local
cable TV broadcasting,
and then connect a cable
Broadcasting Receiver to
the PDP as shown right.
Watching Cable
Broadcasts
Connect a Cable Broadcasting Receiver to the PDP.
• Prepare the A/V cable.
• Connect the receiver(Output) to PDP(Video Input) as shown below.
• While using the scart cable for connection, put the ferrite core to the middle
of the cable to prevent EMI (Electro Magnetic Interference).
1
Cable Broadcasting Receiver
Video/Audio
S-Video
Video/Audio
Ferrite Core
Press the Power Buttons
• Turn the PDP and the receiver ON.
2

Daewoo DT-42A1 Specifications

General

Brand	Daewoo
Model	DT-42A1
Category	Flat Panel TV
Language	English