Adjusting Screen
• You can adjust screen size
or aspect ratio as desired.
Adjusting with
Screen Size button
Press the SCREEN SIZE Button.
• The current screen size will be displayed on
the screen.
• Each time you press the SCREEN SIZE button
on the remote control, a different screen size
appears. The sequence used is as follows in
case of AV and TV modes :
1
NOTES:
1) Displaying a picture in a 4:3 mode for a long time may cause
phosphor of the PDP to be burned. So avoid displaying a
picture in 4:3 screen size for a long time.
2) Under Component,PC and DVI inputs,only 16:9,4:3 and
panorama are available.
3) Auto : Displays pictures of original picture size.
16:9 : 16:9 picture formats
14:9 : 14:9 picture formats
4:3 : 4:3 picture formats like an analog TV
Panorama : 16:9 picture formats with panorama effect
LB : Enlarges the screen as to fill the black part
above and below the picture.
LBS : Enlarges the screen, and shifts up as to see
the subtitles in case you are watching video
with subtitles.
To Next Page
Loading...
Need help?
General