Daewoo LV32L1B1LM User Manual

PC
Connection
17
1. First adjust resolution of the PC. (Refer to table in page 18.)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. Select VGA mode, using the “TV/AV” button of the Remote controller.
1. First adjust resolution of the PC. (Refer to table in page 18.)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4
Select HDMI mode, using the “TV/AV” button of the Remote controller.
When connecting with PC(D-Sub) cable.
When connecting with a DVI to HDMI cable.
Note : If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the
picture upper.
TV
TV
AV INPUT MONITOR OUT
OPTICAL
INPUT
PC
ANT
COMPONENT
HDMI
2
PC AUDIO
HDMI
1
Pr
R AUDIO L
Pb Y
AV INPUT MONITOR OUT
OPTICAL
INPUT
PC
ANT
COMPONENT
HDMI
2
PC AUDIO
HDMI
1
Pr
R AUDIO L
Pb Y

Daewoo LV32L1B1LM Specifications

General

Brand	Daewoo
Model	LV32L1B1LM
Category	LCD TV
Language	English