Daikin AKZ439 User Manual

26
You can set the parameter that enables the additional setting functions of the Oil Cooling Unit.
For description of the additional setting functions and parameter list, refer to page .
Parameter setting procedure
3
Setting procedure
• Go to the parameter setting mode by pressing the key for
five seconds.
See “Mode changing operation” on page .
• The “SETTING” lamp on the operation mode indicator lights.
∗ “P” blinks on the data number display.
1. Select the parameter setting mode.
Change the parameter number to a desired number with
the or key.
• After the selected parameter number is displayed for approx.
0.5 seconds on the data display, the set value appears.
2. Select a parameter number.
• Press the key to register the parameter number.
• After the number is registered, the value on the data display
blinks.
∗ “P” on the data number display remains lit.
3. Register the parameter number.
After the set value is registered, the value on the data display
remains lit.
∗ “P” blinks on the data number display.
5. After changing the set value, press the
key to register it.
When the value on the data display is blinking, change the set
value with the or key.
4. Change the set value.
• Press the key, to return to the normal mode.
See “Mode changing operation” on page .
• The “NORMAL” lamp on the operation mode indicator lights.
6. Return to the normal mode.
25
17
17
1
Data number
display
Operation
mode indicator
2 2 3
4 4 5
6
Data display
Handling
Useful Functions
PIM00318A_EN.fm Page 26 Tuesday, October 26, 2010 12:37 PM

Daikin AKZ439 Specifications

General

Brand	Daikin
Model	AKZ439
Category	Air Conditioner
Language	English