To Next Page

To Previous Page

Method of Transportation / Conveyance / Storage

 Precautions on transportation / conveyance / storage

 Carry out the transportation or conveyance according to the following method.

1. During transportation or conveyance, wear gloves and a helmet.

2. Do not transport or convey the product by any method other than that specified below.

3. For a product with a tank (-T), the unit may fall when transport or convey by hanging with the eye plate if the tank is filled

with oil.

Do not transport or convey the unit after installing the tank, which is prepared by the customer, by hanging the eye plate. The

unit may fall.

4. For the different-voltage model (-047, -048), carry out the transportation or conveyance using the hanger of transformer box.

If you hang it using the eye plate, it may fall.

5. Set the ambient storage temperature to 0 to 55˚C (annual average 25˚C) and set the ambient humidity to 95% (RH) or less

(annual average is less than 75%).

Stay away from the product during transportation or conveyance using the hanging tool.

Carry out the transportation or convey-

ance by fixing the hanging tool to the

right and left eye plates.

Eye plate

Hanger

Use the protector to protect the external plate.

For

different-voltage model (-047, -048)

400 mm or more

For other than

different-voltage model (-047, -048)

Installation

Procedure

PIM00318A_EN.fm Page 5 Tuesday, October 26, 2010 12:37 PM

Daikin AKZ439 User Manual

Questions and Answers: