42
EC DECLARATION OF
EC DECLARATION OF
INCORPORATION OF PARTLY
INCORPORATION OF PARTLY
COMPLETED MACHINERY
COMPLETED MACHINERY
[01] DAIKIN INDUSTRIES,LTD
1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan
[02] Technical Documentation is obtained by the following authorized.
Authorized representative Sauer Bibus GmbH
Address Lise-Meitner-Ring 13, D-89231 Neu-Ulm, Germany
[03] Hereby declares that the machinery described below:
Oil Cooling Unit AKZ 9 Series
Models: AKZ149-(B)C(H)(T), AKZ149-017,020,023,024,026,027,029,030
AKZ329- (B)C(H)(T), AKZ329-017,020,023,024,026,027,029,030
AKZ439- (B)C(H)(T), AKZ439-017,020,023,024,026,027,029,030
[04] This declaration complies with the provisions of the machinery directive and the
regulations transposing it into national law, but
the machinery described in this
certificate must not be put into service until the machinery into which it is to be incorporated
has been declared in conformity with the provisions of the Machinery and their amendments.
Note) This declaration becomes invalid if technical or operational modifications are introduced
without the manufacturer’s consent
[05] Also complies with the provisions of the following European Directives:
- EMC Directive 2004/108/EC
Relevant information that should be transmitted in response to a reasoned
request by the national authorities, by the electronic method or other according
to the request.
[06] Complies with the provisions of the following harmonised standard:
- Machinery Directive: EN 378-2:2008
- EMC Directive: EN 61000-6-4:2007
EN 55011:2007+ A2:2007, (group 1, class A)
EN 61000-6-2:2005
[07]
1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan On 1. July. 2010
[08] Kenjiro
Suzuki
Quality Assurance Department Manager,Oil-hydraulic Division, Yodogawa Plant
CE compliance declaration
See the declaration of conformity below for a CE model (menu symbol: C).
PIM00318A_EN.fm Page 42 Tuesday, October 26, 2010 12:37 PM
To Next Page
Loading...
Need help?
General
