English 19
Operation Contents
Program Dry
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
Program Dry Operation
The microcomputer is in automatic temperature and fan speed control. Therefore, temperature or ●
fan speed settings cannot be made or changed while the air conditioner is in operation.
Home Leave
Home Leave is a feature that enables to keep the room temperature above 10°C when the
occupants are out.
Note
This function will switch on heating if the installation is switched off. ●
Operation Method
The home leave can not be enabled when a centralized control is connected.
1
Set temperature
28°C
Cool
Return Setting
Set temperature
28°C
Cool
Return Setting
Press and hold the “ ● ” or “ ” button
for at least four seconds. (During
backlight lit)
The Home Leave icon displays and ●
function is enabled.
The Home Leave icon shows the status
of the home leave function.
ON Home leave is enabled
FLASHING Home leave is active
OFF Home leave is disabled
To cancel the home leave mode, continue
●
pressing “ ” or “ ” button for at least
four seconds. (During backlight lit)
01_EN_3P243520-1B.indd 1901_EN_3P243520-1B.indd 19 5/15/2009 10:21:05 AM5/15/2009 10:21:05 AM
To Next Page
Loading...
Need help?
General
