32 English
Quick Cooling/Heating
Quick Cooling/Heating
The indoor unit is automatically controlled, increasing the power of the
outdoor unit and quickly bringing the room to a comfortable temperature.
Fan speed display goes off and fan speed can no longer be switched. ●
Cannot be set when in fan and dry modes. ●
Quick Cooling/Heating mode will run for a maximum of 30 minutes before the unit automatically ●
returns to normal operation.
Activating mode selector will return the air conditioner to normal operation. ●
In heating mode, fan speed may increase and the wind temperature may decrease. ●
Adjust the operation as desired.
Ventilation
Display method for ventilation settings screen
Operation Method
1
Return Setting
MainMenu
Set temp mode changeover
Airflow Direction
Quick Cool/Heat On/Off
Ventilation
Timer setting
Service Contact/Model Info
1/2
Return Setting
Ventilation
Ventilation rate
Ventilation mode
2/2
Display the main menu screen. ●
(See page 26.)
Press ● buttons to select Ventilation
on the main menu screen.
(For models with no ventilation function,
Ventilation will not be displayed on the main
menu screen.)
Press Menu/Enter button to display the
ventilation settings screen.
Changing the ventilation rate
Operation Method
1
Return Setting
Ventilation
Ventilation rate
Ventilation mode
2/2
Bring up the ventilation settings screen ●
(see above).
Press ● buttons to select
Ventilation rate on the ventilation
settings screen.
Press Menu/Enter button to display the
ventilation rate settings screen.
Menu Manipulation
01_EN_3P243520-1B.indd 3201_EN_3P243520-1B.indd 32 5/15/2009 10:21:16 AM5/15/2009 10:21:16 AM