Daikin BRC1E51A7 User Manual

English 27
Set temp mode changeover
Limit Operation 
Limit operation provides thermostat control within the range of the set minimum and maximum temperature.
The minimum temperature setting will trigger heating. The maximum temperature setting will trigger cooling.
Operation Method
The limit operation can not be enabled when a centralized control is connected.
1
Return Setting
MainMenu
Set temp mode changeover
Airflow Direction
Quick Cool/Heat On/Off
Ventilation
Timer setting
Service Contact/Model Info
1/2
28°C
Fan
ReturnPress the menu button
Set temperature
max
20°C
min
Basic screen
Display the main menu screen. ●
(See page 26.)
Press ● buttons to select “Set
temp mode changeover” on the
main menu screen.
Pressing Menu/Enter button takes ●
you back to the basic screen, and
the set temperature is displayed in
max °C min °C. (Limit Operation)
To return to the normal set temperature *
screen, use “Set temp mode changeover” in
the Main Menu again.
2
Fan
ReturnPress the menu button
Set temperature
max
20°C
min
28°C
To change the set temperature, ●
press buttons.
The set temperature is highlighted
and ready to be changed.
The set temperature will increase by ●
1°C when the button is pressed
and decrease by 1°C when the
button is pressed.
Note
The difference between the maximum and minimum ●
temperatures cannot be set to less than 6°C.
(* Maximum temperature – Minimum temperature ≥ 6°C)
3
Fan
ReturnPress the menu button
Set temperature
max
20°C
min
28°C
Pressing ● buttons switches the
variable set temperature between
max. and min.
01_EN_3P243520-1B.indd 2701_EN_3P243520-1B.indd 27 5/15/2009 10:21:13 AM5/15/2009 10:21:13 AM

Daikin BRC1E51A7 Specifications

General

Brand	Daikin
Model	BRC1E51A7
Category	Remote Control
Language	English