23
Quick Reference of Main Menu
Main Menu Items
Setting and display items Description
Reference page
Air Flow
Direction
(only if the
LQGLYLGXDODLUÀRZ
function is
installed)
Individual setting 8VHGWRVHWDQ$LUÀRZGLUHFWLRQIRUPD[LPXP
ÀDSVLQGLYLGXDOO\
,QFDVHRI6SULWV\VWHPPD[LPXPXQLWV
XQLW$%&'
,QFDVHRI959PD[LPXPXQLWVXQLWWR
15)
28
Individual setting list Used to see the table for setting for maximum
ÀDSV
29
Individual set all
reset
Used to clear all of the individual settings.
30
Quick Start
(SPLIT system only)
Used to set the room to a comfortable
temperature quickly (unless the system is not
in Dry or Fan operation).
The maximum quick cooling/heating
operation period is 30 minutes.
30
Ventilation
Ventilation
operation
settings for Heat
Reclaim
Ventilator
Ventilation Rate
Used to set to Low or High
32
Ventilation Mode
Used to set AutomaticEnergy Reclaim
VentilationDQGBypass.
33
Energy
Saving
Options
Energy Saving list Enable or Disable can be set up about the
IROORZLQJPHQXV
34
Setpoint range set The set temperature range can be restricted.
It is possible to restrict the temperature range
based on a model and the mode of operation.
35
Set back condition 'HWHUPLQHWKHSRLQWZKHQDLUFRQGLWLRQHULV
turned off again from the setback control.
(recovery differential).
36
Sensing Sensor (low)
(only if the sensing
sensor is installed)
1RWH
When no people are detected during a
FRQWLQXRXVO\¿[HGWLPHWKHIXQFWLRQZLOO
automatically change the air conditioning
target temperature.
,ISHRSOHDUHGHWHFWHGLWZLOOUHWXUQWRWKH
normal set temperature.
37
Sensing Sensor
(stop) (only if the
sensing sensor is
installed)
1RWH
When no people are detected during a
FRQWLQXRXVO\¿[HGWLPHWKHIXQFWLRQZLOO
automatically stop the air conditioner.
38
Setpoint Auto Reset (YHQLIWKHVHWWHPSHUDWXUHLVFKDQJHGLW
returns to the preset temperature after
SURJUHVVRIDGH¿QHGSHULRGRIWLPH
39