Danfoss H1B 060 Service Manual

General specifications
General specifications
Design
Piston motor with variable displacement bent axis design
Direction of rotation
Bi-directional
Pipe connections
Main pressure ports: ISO split flange boss
Remaining ports: SAE straight thread O-ring boss
Recommended installation
Discretionary, the housing must always be filled with hydraulic fluid
Physical properties
Physical properties
Features Unit
Size
060 080 110 160 210 250
Displacement
maximum
cm
3
[in
3
]
60 [3.66] 80 [4.88] 110 [6.71] 160 [9.76] 210 [12.81] 250 [15.25]
minimum
12 [0.73] 16 [0.98] 22 [1.34] 32 [1.95] 42 [2.56] 50 [3.05]
Theoretical flow at
max. displ.
at rated speed
l/min
[US gal/min]
216 [57] 256 [68] 319 [84] 416 [110] 504 [133] 550 [145]
at max. speed
270 [71] 328 [87] 407 [108] 528 [139] 630 [166] 700 [185]
Theoretical torque
at max. displacement
N•m/bar
[lb•in/1000 psi]
0.96 [583] 1.27 [777] 1.75 [1069] 2.55 [1555] 3.34 [2038] 3.98 [2426]
Theor. corner power at rated speed and max.
working pressure (∆p = 450 bar [6527 psi])
kW [hp] 266 [357] 321 [430] 396 [531] 513 [689] 609 [817] 684 [917]
Mass moment of inertia of rotating
components
kg•m
2
[slug•ft
2
]
0.0038
[0.0028]
0.0062
[0.0046]
0.0108
[0.0080]
0.0211
[0.0156]
0.0306
[0.0226]
0.0402
[0.0296]
Case volume
l [US gal] 0.9 [0.24] 1.0 [0.26] 1.4 [0.37] 2.7 [0.71] 2.8 [0.74] 4.1 [1.08]
Weight dry (Electric proportional control)
Configuration Size
060 080 110 160 210 250
SAE
29.8 kg [65.7 lb] 34.8 kg [76.7 lb] 48.8 kg [107.6 lb] 61.9 kg [136.5 lb] 81.0 kg [179 lb] 87.0 kg [196.2 lb]
DIN
28.3 kg [62.4 lb] 34.4 kg [75.8 lb] 45.0 kg [99.2 lb] 59.3 kg [130.7 lb] 75.0 kg [165 lb] –
Cartridge
26.9 kg [59.3 lb] 33.0 kg [72.6 lb] 41.8 kg [92.2 lb] 54.7 kg [120.6 lb] – –
Mounting flange
Configuration Size
060 080 110 160 210 250
SAE ISO 3019/1
127-4 (SAE C) 4-bolt 152-4 (SAE-D) 4-bolt 165-4 (SAE E)
DIN ISO 3019/2, B4
125 HL 4-bolt 140 HL 4-bolt 160 HL 4-bolt 180 HL 4-bolt 200 HL 4-bolt
–
Cartridge
Pilot Ø160 mm
2-bolt (200 dist.)
M16
Pilot Ø190 mm
2-bolt (224 dist.)
M20
Pilot Ø200 mm
2-bolt (250 dist.) M20 – –
Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Technical specifications
©
Danfoss | August 2018 AX00000025en-US0504 | 13

Danfoss H1B 060 Specifications

General

Brand	Danfoss
Model	H1B 060
Category	Engine
Language	English