Fasteners, plugs with torque chart
Proportional controls port, plug and fasteners (with radial ported endcap)
Fastener size and torque chart
Item Fastener Wrench size Torque
B0050
Solenoid screws
4 mm internal hex 6 N•m [4 lbf•ft]
C0110
Control (proportional) assembly screws
6 mm internal hex 37 N•m [28 lbf•ft]
C0110, C0120
Control (two-position) assembly screws
10 mm internal hex 115 N•m [85 lbf•ft]
J0020
Speed sensor screw
5 mm internal hex 8 N•m [6 lbf•ft]
N0010
Displacement limiter screw
6 mm internal hex N/A
N0020
Displacement limiter lock-nut
19 mm 45 N•m [32 lbf•ft]
P0020
Servo piston cover screws
10 mm internal hex 115 N•m [85 lbf•ft]
Plug size and torque chart
Item O-ring plug Wrench size Torque
B0060
9/16 - 18UNF 1/4 internal hex 40 N•m [30 lbf•ft]
C0050
9/16-18 UNF (not shown) 1/4 internal hex 40 N•m [30 lbf•ft]
C0060
5/16 - 24UNF 3/8 internal hex 8 N•m [5 lbf•ft]
Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Torque chart
66 |
©
Danfoss | August 2018 AX00000025en-US0504
To Next Page
Loading...
Need help?
General
