Danfoss PVE Series 4 User Manual

Hirschmann/DIN code numbers (continued)
Feature anodized
Connector 1x4 = one plug x four pins
PVEO 12 V 155G4272
24 V 155G4274
Deutsch code numbers
Feature anodized
Connector 1x4 = one plug x four pins
PVEH passive 11111206
PVES passive 11111207
PVEO 12 V 11110601
24 V 11110652
PVHC 12 V 11110597
24 V 11110598
ATEX (24 V) connector code numbers
Cable type PFOP PFOP PFOP,
cable dir PVB
BFOU
Flying wire 5 m 10 m 5 m 5 m
PVEH passive 11084104 11084112 11084096 11084107
PVEO 11084103 11084111 11084095 11084106
PVE accessories
Connector code numbers
Code number Description
157B4992 AMP CONNECTING KIT
(GREY)
4 pin with housing, contact and wire sealing
157B4993 AMP CONNECTING KIT
(BLACK)
4 pin with housing, contact and wire sealing
984L3165 EL-PLUG, ON-OFF black Hirschmann DIN connector set*
Set of seals code numbers
Code number Description Actuator
157B4997 Set of seals PVE for PVG 32/ PVG 100
155G8519 PVE for PVG 120 (also interface plate/PVB for PVHC)
11061235 PVHC for PVG 32/ PVG 100
Technical Information PVE, Series 4 for PVG 32/100/120 and PVHC
PVE code numbers
50 520L0553 • Rev GD • Jan 2014

Danfoss PVE Series 4 Specifications

General

Brand	Danfoss
Model	PVE Series 4
Category	Controller
Language	English