PVE controlled PVG with PVSK
PVE stands for PVE actuator
The Danofss PVE is built on more than thirty years experience of electrical valve control and is the perfect
fit for our high performance proportional valves PVG 32, PVG 100 and PVG 120, as it is for our EH steering.
All our products are developed in close cooperation with system manufacturers from the mobile
hydraulic market. That is the reason for our high performance in all market segments
The PVE can be controlled from a switch, a joystick, a PLC, a computer or a Danofss PLUS+1
®
micro-
controller. The PVE is available in multiple variants. A short list here just gives the main variations.
Available PVE variants
Actuation On/Off
Proportional - Closed loop controlled
Proportional - Direct control
Control signal Voltage
PWM
Current (PVHC)
Precision Standard precision
High precision
Super high precision
Feedback Spool position
Direction indicator
Error
None
Connectors Deutsch
AMP
DIN/Hirschmann
Fault detection and reaction Active
Passive
None
Power supply 11 V – 32 V multi-voltage
12 V
24 V
Technical Information PVE, Series 4 for PVG 32/100/120 and PVHC
General Information
8 520L0553 • Rev GD • Jan 2014
To Next Page
Loading...
Need help?
General
