VLT
®
8000 AQUA
Introduction
■ Introduction to Operating Instructions
These Operating Instructions are divided into four
sections with information about VLT 8000 AQUA.
Introduction to AQUA: This section tells you the advantages you can obtain by using a VLT
8000 AQUA - such as Automatic Energy Optimization, Constant Torque
or Variable Torque and other AQUA relevant functions.
This section also contains examples of applications as well as
information about Danfoss.
Installation: This section tells you how to carry out a mechanically correct installation
of the VLT 8000 AQUA.
Furthermore, a list is given of mains and motor connections, together
with a description of the control card terminals.
Programming: This section describes the control unit and the software parameters for
the VLT 8000 AQUA. Also included is a guide to the Quick Setup menu,
which allows you to get started on your application very quickly.
All about VLT 8000 AQUA: This section gives information about status, warning and error messages
from the VLT 8000 AQUA. Additionally, information is given on technical
data, ser-vice, factory settings and special conditions.
NB!:
Indicate
s something to be noted by the reader.
Indicates a general warning
Indicates a high-voltage warning
MG.83.A2.02 - VLT is a registered Danfoss trademark
9
To Next Page
Loading...
Need help?
General