Danfoss VLT AutomationDrive FC 300 Programming Guide

2.1.12 Changing a Text Value
If the selected parameter is a text value, change the text value by means
of the [
▲
] [
▼
] navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value you want to save and press [OK].
2.1.13 Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data value, change the
chosen data value by means of the [
◀
] [
▶
] navigation keys as well as
the [
▲
] [
▼
] navigation keys. Use the [
◀
] [
▶
] navigation keys to move
the cursor horizontally.
Use the [
▲
] [
▼
] navigation keys to change the data value. The up key
enlarges the data value, and the down key reduces the data value. Place
the cursor on the value you want to save and press [OK].
2.1.14 Infinitely Variable Change of Numeric Data Value
If the chosen parameter represents a numeric data value, select a digit
by means of the [
◀
] [
▶
] navigation keys.
Change the selected digit infinitely variably by means of the [
▲
] [
▼
]
navigation keys.
The chosen digit is indicated by the cursor. Place the cursor on the digit
you want to save and press [OK].
2.1.15 Changing a Data Value, Step-by-Step
Certain parameters can be changed step by step or infinitely varying. This applies to par. 1-20 Motor Power [kW] , par. 1-22 Motor Voltage and
par. 1-23
Motor Frequency .
The parameters are changed both as a group of numeric data values and as numeric data values infinitely varying.
2 How to Programme FC 300 Programming Guide
24 MG.33.M8.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss VLT AutomationDrive FC 300 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300
Category	DC Drives
Language	English