Danfoss VLT AutomationDrive FC 301 Operating Guide

4.8
5
5.1
5.1.1
5.2
5.3
6
6.1
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.1.7
6.1.8
6.1.9
6.1.10
6.1.11
6.1.12
6.1.13
6.1.14
6.1.15
7
7.1
7.2
7.3
7.4
8
8.1
8.1.1
8.1.2
8.1.3
8.1.4
8.1.5
8.2
Installation Check List 20
Commissioning 22
Safety Instructions 22
Before Applying Power 22
Local Control Panel Operation 23
System Set-up 24
Basic I/O Configuration 25
Application Examples 25
Programming a Closed-loop Drive System 25
Wiring Configuration for Automatic Motor Adaptation (AMA) 26
Wiring Configuration for Automatic Motor Adaptation without T27 26
Wiring Configuration: Speed 27
Wiring Configuration: Feedback 29
Wiring Configuration: Run/Stop 31
Wiring Configuration: Start/Stop 33
Wiring Configuration: External Alarm Reset 35
Wiring Configuration: RS485 36
Wiring Configuration: Motor Thermistor 36
Wiring for Regen 37
Wiring Configuration for a Relay Setup with Smart Logic Control 38
Wiring Configuration: Mechanical Brake Control 39
Wiring Configuration for the Encoder 39
Wiring Configuration for Torque and Stop Limit 41
Maintenance, Diagnostics, and Troubleshooting 43
Maintenance and Service 43
Warning and Alarm Types 43
Warning and Alarm Displays 44
Descriptions of Warnings and Alarms 44
Specifications 60
Electrical Data 60
Mains Supply 200–240 V 60
Mains Supply 380–500 V 62
Mains Supply 525–600 V (FC 302 only) 65
Mains Supply 525–690 V (FC 302 only) 67
Power Cable Cross-sections 70
Mains Supply 70
AQ267037727118en-000101/130R03004 | Danfoss A/S © 2021.01
Contents
VLT® AutomationDrive FC 301/FC 302
Operating Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English