Danfoss VLT AutomationDrive FC 361 Series User Manual

10.1.1 Ordering Type Code for Enclosures J8–J9
Description Pos Possible choice
Product group 1-6 FC-361
Model 7–10 N90: 90 kW (125 hp)
N110: 110 kW (150 hp)
N132: 132 kW (200 hp)
N160: 160 kW (250 hp)
N200: 200 kW (300 hp)
N250: 250 kW (350 hp)
N315: 315 kW (450 hp)
Mains voltage 11-12 T4: 380–480 V AC
Enclosure 13-15 E20: IP20
RFI lter 16-17 H2: RFI lter, class A2
Brake 18 X: No brake IGBT
Display 19 X: No Local Control Panel
PCB coating 20 C: 3C3
Mains option 21 X: No mains option
Adaptation 22 X: Standard cable entries
Adaptation 23 X: No adaptation
Software release 24-27 SXXX: Standard software
Software language 28 X: Standard language pack
Table 10.3 Ordering Type Code for Enclosures J8–J9
1) Available for all D-frames.
10.1.2
Ordering Options for All VLT
®
AutomationDrive FC 361 Enclosures
Description Pos Possible option
A options 29–30 AX: No A option
A0: VLT
®
PROFIBUS DP MCA 101
AL: VLT
®
PROFINET MCA 120
B options 31–32 BX: No option
Table 10.4 Ordering Type Codes for FC 361 Options
How to Order a Drive Design Guide
MG06K102 Danfoss A/S © 03/2019 All rights reserved. 73
10 10

Danfoss VLT AutomationDrive FC 361 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 361 Series
Category	DC Drives
Language	English