Danfoss VLT AutomationDrive FC 361 User Manual

3.6 Local Control Panel (LCP)
The local control panel (LCP) is the combined display and keypad on the front of the drive.
The LCP is used to:
•
Control the drive and motor.
•
Access drive parameters and program the drive.
•
Display operational data, drive status, and warnings.
A numeric local control panel (NLCP) is available as an option. The NLCP operates in a manner similar to the LCP, but there
are
dierences. For details on how to use the NLCP, see the product-specic programming guide.
130BF155.11
Auto
On
Reset
Hand
On
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Back
Cancel
Info
OK
Status
1(1)
0.00 kW
Off Remote Stop
0.0 Hz
On
Alarm
Warn.
0.00 A
0 RPM
0.0 %
A1.1
A1.2
A1.3
A2
A3
B1
B2
B4
B3
C1
C2
C3
C4
C5
D1
D2
D3
E1
E2
E3
E4
Illustration 3.4 Local Control Panel (LCP)
A. Display area
Each display readout has a parameter associated with it. See Table 3.2. The information shown on the LCP can be
customized for specic applications. Refer to chapter 3.7.1.2 Q1 My Personal Menu.
Callout Parameter Default setting
A1.1 Parameter 0-20 Display Line 1.1 Small Speed [RPM]
A1.2 Parameter 0-21 Display Line 1.2 Small Motor current [A]
A1.3 Parameter 0-22 Display Line 1.3 Small Power [kW]
A2 Parameter 0-23 Display Line 2 Large Frequency [Hz]
A3 Parameter 0-24 Display Line 3 Large kWh counter
Table 3.2 LCP Display Area
Product Overview VLT® AutomationDrive FC 361
10 Danfoss A/S © 06/2018 All rights reserved. MG06I102
33

Danfoss VLT AutomationDrive FC 361 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 361
Category	DC Drives
Language	English