Danfoss VLT FC 100 User Manual

2.1.7. Safe Stop
The FC 302 can perform the safety function Safe Torque Off (As defined by draft CD IEC
61800-5-2) or
Stop Category 0 (as defined in EN 60204-1).
It is designed and deemed suitable for the requirements of Safety Category 3 in EN 954-1. This
function is called safe stop. Prior to integrating and using safe stop in an installation, a thorough
risk analysis must be carried out on the installation in order to determine whether the safe stop
functionality and safety category are appropriate and sufficient. In order to install and use the
Safe Stop function in accordance with the requirements of Safety Category 3 in EN 954-1, the
related information and instructions of the FC 300 Design Guide MG.33.BX.YY must be followed!
The information and instructions contained in the Instruction Manual are not sufficient for a correct
and safe use of the safe stop functionality!
2. Safety Instructions and General Warning
VLT
®
Automation Drive FC 300
Instruction Manual High Power
10 MG.33.U1.22 - VLT
®
is a registered Danfoss trademark.
2

Danfoss VLT FC 100 Specifications

General

Brand	Danfoss
Model	VLT FC 100
Category	DC Drives
Language	English