Danfoss VLT FC 100 User Manual

3. How to Install
3.1. How to Get Started
3.1.1. About How to Install
This chapter covers mechanical and electrical installations to and from power terminals and control
card terminals.
Electrical installation of
options is described in the relevant Instruction Manual and Design Guide.
3.1.2. How to Get Started
The adjustable frequency drive is designed for quick installation and is EMC-compliant. Just follow
the steps described below.
Read the safety instructions before installing the unit.
Mechanical Installation
• Mechanical mounting
Electrical Installation
• Connection to Line and Protecting
Ground
• Motor connection and cables
• Fuses and circuit breakers
• Control terminals - cables
Quick set-up
• Local Control Panel, LCP
• Automatic Motor Adaptation, AMA
• Programming
Frame size is dependent on enclosure type,
power range and line voltage.
3.1: Diagram showing basic installation including
line power, motor, start/stop key, and potentiom-
eter for speed adjustment.
VLT
®
Automation Drive FC 300
Instruction Manual High Power
3. How to Install
MG.33.U1.22 - VLT
®
is a registered Danfoss trademark. 13
3

Danfoss VLT FC 100 Specifications

General

Brand	Danfoss
Model	VLT FC 100
Category	DC Drives
Language	English