Danfoss VLT FC 100 User Manual

3.6.3. Speed Up/Slow
Terminals 29/32 = Speed up/Slow: .
Terminal 18 = Par. 5-10 [9]
Start
(default)
Terminal 27 = Par. 5-12 [19]
Freeze
reference
Terminal 29 = Par. 5-13 [21] Speed
up
Terminal 32 = Par. 5-14 [22] Slow
Note: Terminal 29 only in FC x02 (x=series
type).
3.6.4. Potentiometer Reference
Voltage reference via a potentiometer:
Reference Source 1 = [1]
Analog in-
put 53
(default)
Terminal 53, Low Voltage = 0 Volt
Terminal 53, High Voltage = 10 Volt
Terminal 53, Low Ref./Feedback = 0
RPM
Terminal 53, High Ref./Feedback =
1500 RPM
Switch S201 = OFF (U)
3. How to Install
VLT
®
Automation Drive FC 300
Instruction Manual High Power
66 MG.33.U1.22 - VLT
®
is a registered Danfoss trademark.
3

Danfoss VLT FC 100 Specifications

General

Brand	Danfoss
Model	VLT FC 100
Category	DC Drives
Language	English