Danfoss VLT PROFINET MCA 120 User Manual

By using the hardware switches it is possible to set 253
different station names according to Table 3.3 (FC 302 used
in this example):
Switch 8 7 6 5 4 3 2 1
12-08 Host Name
+128 +64 +32 +16 +8 +4 +2 +1
‘FC-302-005’ OFF OFF OFF OFF OFF ON OFF ON
‘FC-302-035’ OFF OFF ON OFF OFF OFF ON ON
‘FC-302-082’ OFF ON OFF ON OFF OFF ON OFF
‘FC-302-212’ ON ON OFF ON OFF ON OFF OFF
Table 3.3 Host Names Setting
The Host Name change comes into effect at the next
power-up, and can be read in 12-08 Host Name.
3.3 LED Behaviour
The option has 3 bi-coloured LEDs that allow a fast and
detailed diagnosis. The 3 LEDs are each linked to its
unique part of the PROFINET option, see Table 3.4.
LED label Description
MS Module Status, reflects the activity on the
PROFINET stack
NS1 Network Status 1, reflects the activity on port 1
NS2 Network Status 2, reflects the activity on port 2
Table 3.4 LED Label
130BD784.10
MS LED
NS LED’s
MCA 120
PROFINET
SW. ver. 3.00 (TM: 3:15)
MS
NS2
NS1
Ethernet Port 1 Ethernet Port 2
MAC: 00:1B:08:XX:XX:XX
Option A
130B1135
Host Name
8 7 6 5 4 3 2 1
Ethernet Port 1 Ethernet Port 2
Illustration 3.13 Overview of the Option
130BD804.10
ON WARNING ALARM
Bus MS
NS1
NS2
Illustration 3.14 LED Panel for FCD 302
The LED is visible from the outside of an FCD 302.
How to Install
Operating Instructions
16 Danfoss A/S © Rev. 2014-02-27 All rights reserved. MG90U302
33

Danfoss VLT PROFINET MCA 120 Specifications

General

Brand	Danfoss
Model	VLT PROFINET MCA 120
Category	DC Drives
Language	English