4 About the Printer
Printer Top and Front
Cover Open the cover to access the printhead and ribbon.
Latch Button Push the latch button to release the cover and open
the printer.
Cover Ridges Press down on the ridges when closing the cover to
make sure that it latches properly on both sides.
Ribbon Cartridge
Handle
Use the handle to remove the print ribbon cartridge
from the printer.
Card Input Hopper The input hopper loads cards to print. The hopper holds
up to 100 cards (0.030 in. or 0.762 mm thickness).
Front Panel
The front panel lets you work with the printer. It includes
the U
SER button, the status lights, the power button,
and the LCD panel with navigation keys.
Output Hopper The output hopper holds up to 25 completed cards.
(The output hopper of a model SD260 with a manual
feed holds 5 cards.)
Cover
Latch Button
Card Input
Hopper
Front Panel
Output
Hopper
Cover Ridges
Ribbon Cartridge
Handle
To Next Page
Loading...
Need help?
General
