DataCard SD Series User Manual

SD Series Card Printers User’s Guide 65
111: Card not picked
Theprinterdidnotpickacard.To completethecurrentcard:
Forprinterswithaninputhopper,opentheinputhopper, addorrepositioncards,
andclosethehopper.
Forprinterswithsinglecardfeed,pushthecardinuntiltheprinterpicksit.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickOK,orclickCancel
tocancelthecard.
112: Card hopper empty
Theprinterdidnotdetectcardsintheinputhopper.
Addcardstotheinputhopper.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickOK,orclickCancel
tocancelthecard.
113: Close cover to continue
Theprintercovermustbeclosedtoprint.
Pushdownonthecovertolatchit.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickOK,orclickCancel
tocancelthecard.
HINTS&TIPS
Makesurethattheribboncartridgeisinstalledproperlywiththecartridgehandle
evenwiththe edgesoftheprinter.
114: Cover opened during job
Theprintercoverwasopenedwhileprinting.
Pushdownonthecovertolatchit.
PresstheU
SERbuttonontheprinter.Inthemessagebox,clickRetry,orclick
Canceltocancelthecard.
HINTS&TIPS
Makesurethattheribboncartridgeisinstalledproperlywiththehandleeven
withtheedgesoftheprinter.

DataCard SD Series Specifications

General

Brand	DataCard
Model	SD Series
Category	Printer
Language	English