DataCard SD Series User Manual

64 Troubleshooting
108: Magstripe read no data
Theprinterdidnotfindanymagneticstripedataoncard.Thecardwillbe
canceled.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprinter
settings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
HINTS&TIPS
• Thecardmighthavebeenturnedthewrongway.
• Thecardmightnothaveamagneticstripe.
109: Print ribbon problem
Theprintribbonisnotmovingproperly.
1. Opentheprinterandremovetheribboncartridge.
2. Reposition,repair,orreplacetheribbonandadvancetherepairedareaone
fullturn.
3. Replacetheribboncartridgeandclosetheprinter.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickRetry,orclick
Canceltocancelthecard.
110: Print ribbon out or missing
Theprinterdoesnothaveusableribbon.Tocompletethecurrentcard:
1. Opentheprinterandremovetheribboncartridge.
2. Installanewribbonandcleaningroller.
3. Replacethecartridgeandclosetheprinter.
PresstheU
SERbuttonontheprinter.Inthemessage box,clickOK,orclickCancel
tocancelthecard.
HINTS&TIPS
Usedribbonhasnegativeimagesofprinteddata.Tokeepthedataconfidential,
followyourcompanypolicytodiscard usedribbon.

DataCard SD Series Specifications

General

Brand	DataCard
Model	SD Series
Category	Printer
Language	English