To Next Page

To Previous Page

Enter/Exit Programming Mode Code 11

156 QuickScan™ I QD24XX/QBT24XX/QM24XX

Code 11 Set Length 2

This feature specifies one of the bar code lengths for Code 11 Length Control on page 154.

Length 2 is the maximum label length if in Variable Length on page 243 Mode, or the second

fixed length if in Fixed Length on page 243 Mode. Length includes the bar code’s check and

data characters.

The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length

(onl

y one fixed length).

Table 16 provides examples for setting Length 2. See page 243 for detailed instructions on set-

ting this feature.

Table 16. Code 11 Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 11 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ and 0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC1.2

Select Code 11 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters

Datalogic QuickScan QBT24 series User Manual

Questions and Answers: