To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Datalogic QuickScan QBT2430 and is the answer not in the manual?
General| Connectivity | Bluetooth |
|---|---|
| Print Contrast Ratio (Minimum) | 25% |
| Humidity | 5% to 95% non-condensing |
| Type | Handheld |
| Operating Temperature | 0°C to 50°C |
| Drop Resistance | 1.5 m |
| Light Source | LED |
| Scan Rate | 100 scans/sec |
| Decode Capability | 1D, 2D |
| Radio Range (Open Air) | Up to 100 m |
| Battery | Li-ion |
| Interface | USB, RS-232 |
| Supported Barcodes | UPC, EAN, Code 39, Code 128, QR Code, Data Matrix |
Reader operates omni-directionally; orientation is not important for symbol reading.
Reliably decodes all standard 1D and 2D bar codes, sending data rapidly to the host.
Base station provides a locking mechanism to ensure electrical contact between reader and base.
Steps to connect the base station, including cable routing and power connection.
Illustrates a typical setup with the reader, base station, and host device.
Explains the meaning of LED indicators on the QuickScan Base for power and charging.
Details on how to charge the reader's battery using the base or micro-USB.
Step-by-step instructions for safely removing and installing a battery pack.
Procedure to link Datalogic RF devices to the base station.
Steps to link the reader to a Bluetooth adapter using Serial Port Profile mode.
Steps to link the reader to a Bluetooth adapter using HID mode.
Guidance on configuring a Variable PIN Code for Bluetooth connections.
How to use programming bar codes to reconfigure the reader's settings.
Configuring the HID Alternate Mode feature for the reader.
Setting the country/language for the keyboard interface and base.
Specifies how the reader sends character data, affecting case sensitivity.
Lists the host interfaces supported by the base station.
Programming bar codes for configuring various USB and Keyboard Wedge interfaces.
Information on control character emulation for keyboard interfaces.
Specifies the Numbers Lock setting for keyboard wedge interfaces.
Configures the duration of the good read green spot indicator after a successful scan.
Overview of different scanning modes like Trigger Single, Always On, and Stand Mode.
Enables/disables acknowledgment of barcodes not within the aiming pattern.
Enables/disables the ability to decode multiple labels in a single image.
Details on physical dimensions, weight, battery type, and charging times.
Information on light source, angles, field of view, and depth of field.
Lists all supported 1D and 2D barcode symbologies.
Specifications for operating conditions, regulatory, and radio frequency.
Explains reader beeps and LED illuminations for functions and errors.
Indications specific to when the reader is in programming mode.
Interprets LED flashes/beeps to identify reader errors and corrective actions.
Details LED indications for base station status like power, programming, and charging.
Details warranty coverage, claims process, and exclusions for the product.
Customer responsibilities regarding product transit risk and warranty assignment.
Recommendations to minimize the risk of ergonomic injury during product use.
Instructions for safely cleaning the scanner and base station surfaces and contacts.
Guide to accessing technical support, downloads, and repair programs via the website.
Bar codes for entering numbers and characters using a keypad layout.
Instructions for using the keypad to enter variable PIN codes for HID connections.
