Datalogic QuickScan QBT2430 User Manual

Scan Modes
30 QuickScan™ QBT2400
Pick Mode
Pick Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or trans-
mitted to the host. It is active only while the scanner is in
Trigger Single mode. If the scanner switches to a different
Read Mode, Pick Mode is automatically disabled.
Multiple Labels in a Volume
Enables/disables the ability of scanner to decode multiple
labels in the same image. Several programming options are
available for this feature, see the PRG for more information.
NOTE
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
 Pick Mode = Disable
Pick Mode = Enable

Datalogic QuickScan QBT2430 Specifications

General

Brand	Datalogic
Model	QuickScan QBT2430
Category	Barcode Reader
Language	English