Datalogic QuickScan QS2500 User Manual

Product Reference Guide 3
Programming the QS2500
To program the QS2500, you must scan a series of programming bar
codes in the correct order. The inside back cover of this manual contains a
table of alphanumeric bar codes needed to program the various options.
To program each option:
1. Scan the Start Program bar code above the list of options (see the
table below).
2. Enter the option mode by scanning the Option bar code.
3. Find the alphanumeric entry for the option setting you want, and
scan the alphanumeric characters located in Appendix E.
4. Scan the Store Settings bar code in Appendix E.
5. Scan the Exit bar code.
NOTES
Auto-detect - the scanner can automatically detect
the interface hardware for all interfaces except Wand
Emulation.
IBM interfaces - must be selected individually
depending on the port used. Refer to
IBM Interface
(46XX/USB) on page 13
.
NOTES
A software utility, Configurator Express, is also available for pro-
gramming and configuring the QS2500. Refer to the Readme file
on the QS2500 product CD for additional information.
CAUTION
Disabling the Code 39 symbology will disable the scanner’s
capability to read the bar code labels in this manual.

Datalogic QuickScan QS2500 Specifications

General

Wavelength	660 nm
Maximum scan area	102/127 mm
Yaw reading angle	-75 - 75 °
Decoding standards	UPC A, E / EAN 8, 13 / JAN 8, 13, Code 128, Code 93, Pharmacode 39, Code 39, Codabar, Interleaved 2 - 5, Industrial 2 - 5, Matrix 2 - 5, GS1 DataBar, UK/Plessey, MSI/Plessey, Code 16K, Telepen, PDF-417, Code 11
Pitch reading angle	-60 - 60 °
Input voltage	5 V
Power consumption	250 mA
Dimensions (WxDxH)	74 x 114 x 185 mm
Certification	UL, cUL, FCC-A, EN 55022-B, VCCI-A, IEC 60825 Class 1 LED, EU RoHS
Product color	Gray
Storage temperature (T-T)	-30 - 65 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	179 g