Datamax DMX E E-4204 User Manual

8 E-4203/E-4204/E-4304
3.1.2 Interface Connection
The printer can be connected to
the host via a USB, serial or
parallel cable.
Serial
Connection
Parallel
Connection
USB
Connection
To H o s t
-OR-
-OR-
3.1.3 Interface Cables
Choose one connection method that will best serve your purpose:
y To connect the printer to the host’s serial (RS-232C) interface use an
acceptable cable configuration, as shown below (contact your reseller
for ordering information).
Part # 32-2300-01 Part # 32-2301-01
y To connect the printer to the host’s parallel interface use a
Centronics
parallel cable.
y To connect the printer to the host’s USB interface use a standard
USB cable.
Note that the printer has a unique feature: When connected via more than
one interface, it will automatically connect to the first port (serial,
parallel, or USB) that transmits valid data. After this connection has been
made, the printer’s power must be cycled ‘Off’ and ‘On’ to change the
interface connection.

Datamax DMX E E-4204 Specifications

General

Brand	Datamax
Model	DMX E E-4204
Category	Printer
Language	English