Important Safety Instructions
This printer has been carefully designed to provide many years of safe,
reliable performance. As with all electrical equipment, there are a few
basic precautions you should take to avoid hurting yourself or damaging
the printer:
Carefully read the installation and operating instructions provided
with your printer.
Read and follow all warning instruction labels on the printer.
Place the printer on a flat, firm, solid surface.
To protect your printer from overheating, make sure all openings on
the printer are not blocked.
Do not place the printer on or near a heat source.
Do not use your printer near water, or spill liquid into it.
Be certain that your power source matches the rating listed on your
printer. If you are unsure, check with your dealer or with your local
power company.
Do not place the power cord where it will be walked on. If the power
cord becomes damaged or frayed replace it immediately.
Do not insert anything into the ventilation slots or openings on the
printer.
Only qualified, trained service technicians should attempt to repair
your printer.
To Next Page
Loading...
Need help?
General