E-4203/E-4204/E-4304 49
6.0 Introduction
Occasionally, situations arise that require troubleshooting. Possible
problem situations and potential solutions are listed in this section. While
not every situation is addressed, you may find some of these tips helpful.
After the correction action is taken press the FEED button to clear the
alarm. Contact a qualified service technician for problems that persist or
are not covered in this section.
6.1 Troubleshooting Tips
The following table lists the symptoms and the associated page numbers
of the topics covered in the troubleshooting section.
Problem Situation Page
Unacceptable print quality 50
The printer does not print or prints several labels at once 50
The ribbon does not advance 50
Skips every other label 51
Unable to print in rotation 4 51
Prints light on the right side of the label 51
Printer fails to turn on 51
Label advances 1-2 inches before a fault indication 52
Label advances 16 inches before a fault indication 52
Tracking Problems 52
To Next Page
Loading...
Need help?
General